Sundray AP-S900 Outdoor Wireless Access Point | Simet Bilişim Teknolojileri A.Ş.

Sundray AP-S900 Outdoor Wireless Access Point

Sundray

SUNDRAY AP-S900 is an outdoor high-speed wireless access point that supports 802.11a/b/g/n/ac. AP-S900 adopts 2x2 MIMO technology and supports dual-band concurrence of 802.11ac/a/n and 802.11b/g/n to provide high transmission rate up to 1166 Mbps. AP-S900 uses Gigabit port for uplink to ensure high-speed wireless transmission and PoE for remote power supply to simplify network deployment.

SUNDRAY AP-S900 is an outdoor high-speed wireless access point that supports 802.11a/b/g/n/ac. AP-S900 adopts 2x2 MIMO technology and supports dual-band concurrence of 802.11ac/a/n and 802.11b/g/n to provide high transmission rate up to 1166 Mbps. AP-S900 uses Gigabit port for uplink to ensure high-speed wireless transmission and PoE for remote power supply to simplify network deployment.

The shell of AP-S900 is of the IP 68 protection level and boasts waterproof, damp proof, dustproof, fireproof, and sun protection features. The shell can protect AP-S900 against severe weather and environments (-40°C-70°C ) . This ensures that AP-S900 is applicable to both damp and cold areas. AP-S900 also supports the point-to-point and point-to-multipoint relay bridge function, improving the feasibility of outdoor networking. AP-S900 works with SUNDRAY controllers to provide unprecedented quick access experience and secure service access for users. AP-S900 provides four N-type external antenna interfaces. omnidirectional antenna or directional antenna can be selected based on the actual environment. It applies to outdoor environments such as scenic spots, schools and parks, squares, etc.

 

Hardware specifications

Item

Description

Model

AP-S900

Dimensions

210 mm x 210 mm x 70 mm

Ethernet port

A 10/100/1000M Ethernet port

PoE

48 V, 800 mA

Transmit power

≤ 27 dBm

Power adjustment granularity

1 dbm

Power range

3 dBm to the value specified by national regulations

Power consumption

< 35 W

Antenna

External antenna

Antenna interface

Two 2.4 GHz N-type connectors and two 5 GHz N-type connectors

Reset/restore factory settings

None

Status indicator

None

Operating/storage temperature

-40ºC to +70ºC

Operating/storage humidity

0%-100% (non-condensing)

Protection level

IP 68

MTBF

> 250000 H

Software specifications

Item

Description

Model

AP-S900

RF

Streams

2

Maximum transmission speed of a single frequency

2.4 G:300 Mbps
5 G:866 Mbps

Operating frequency band

802.11ac/n/a : 5.725GHz-5.850GHz ; 5.15~5.35GHz

802.11b/g/n : 2.4GHz-2.483GHz

Modulation technology

OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16-QAM@24 Mbps, 64-QAM@48/54 Mbps

DSSS: DBPSK@1 Mbps, DQPSK@2 Mbps, CCK@5.5/11 Mbps

MIMO-OFDM: MCS 0-15   MIMO-OFDM (11ac): MCS 0-9

Channel rate

802.11b: 1, 2, 5.5, 11

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15)

802.11n high throughput support: MCS 0-7 HT 20/40
802.11ac: MCS 0-9; 20/40/80

Channel quantity

802.11a、802.11n、802.11ac(compatible with 802.11a):13 channels

802.11b, 802.11g, 802.11n (compatible with 802.11b/g mode): 13 channels

Manual and automatic channel adjustment

Supported

Automatic power adjustment

Supported

Manual power adjustment

The AP supports manual power adjustment with an adjustment granularity of 1 dBm. The power scope is from 1 dBm to the value specified by national regulations.

Timed turning on or off of RF

RF can be turned on or off based on the specified time period.

Turn off MIMO

Supported. An RF interface can be selected for single output.

WLAN function

Maximum number of connected users

256 (maximum number of connected users of a single RF: 128)

Connected user quantity restriction

Supported

Virtual AP

32

Chinese SSID

Supported

SSID hiding

Supported

Wireless relay/bridge

Point-to-point and point-to-multipoint supported

User-, traffic-, and frequency band-based intelligent load balancing

Supported

Bandwidth restriction

STA-, SSID-, or AP-based rate limiting is supported.

STA function

Abnormal STA disconnection detection, STA aging detection, and STA statistic and status query are supported.

Link integrity detection

Supported

Security authentication

Authentication mode

Pre-shared key authentication, portal authentication, 802.1x authentication, CA certificate authentication, WeChat authentication, SMS authentication, 2-dimensional code authentication, temporary visitor authentication, and authentication exemption are supported.

Pre-shared key

WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK hybrid authentication

Portal authentication

Intelligent terminal type identification is supported. A page matching the terminal size is pushed to terminals. The page logo and displayed information can be customized. In addition, the verification, authentication interval, and reconnection authentication time thresholds can be set.

802.1x authentication

802.1x one-key configuration and 802.1x perception-free authentication are supported. You only need to download the one-key automatic configuration tool at initial access and finish wireless network configuration quickly. This simplified network deployment significantly.

CA certificate authentication

High-security certificate authentication can be implemented by using the CA certificate issuance center embedded into the controller, without the need to constructing a certificate server. Authentication by using a certificate imported from an external certificate server is also supported.

WeChat authentication

After access the wireless network, a user can scan the 2-dimensional code of the shopping mall or enterprise and follow the public account to access the Internet. The one-key follow function can be easily deployed without any code development. In WeChat authentication, a user can access the network by clicking a text message network access link or clicking the menu bar to view advertisements, or access the network via WeChat authorization.

SMS authentication

SMS authentication takes effect forever. That is, a user can directly access the network without authentication after being authenticated via SMS at initial access. This reduces the SMS costs and improves user experience.

2-dimensional code authentication

After a visitor terminal accesses the wireless network, the terminal will automatically display a 2-dimensional page. The approver scans the 2-dimensional code of the visitor terminal via a cell phone and then the visitor can access the Internet. The visitor information is recorded in three dimensions: approver, remarks, and MAC address of the visitor terminal. This ensures user traceability and network security.

Temporary visitor authentication

A temporary user information management system is embedded. A temporary user can log in within the validity period and cannot after the validity period elapses. A secondary permission system for temporary account management is embedded and temporary accounts can be created and managed in this system. The 2-dimensional code of a temporary visitor can be printed and the temporary visitor can scan the 2-dimensional code to access the network. Temporary visitors can be grouped.

Authentication exemption

Only a portal advertisement page is displayed. A user needs to click the login button to access the network without entering any account password or performing other authentication.

Data encryption

Data encryption via TKIP and AES (CCMP) is supported.

Blacklist and whitelist

Static whitelist and blacklist are supported.

User isolation

SSID-based isolation, automatic VLAN grouping, and user isolation of specified VLANs are supported.

WIPS

Supported

Illegitimate AP detection and workaround

Supported

ACL

Account-, access location-, access terminal type- and SSID-based ACL policy assignment and management are supported.

Radius protocol

Supported

Wireless optimization

Application layer acceleration

Acceleration can be performed for the application layer. The acceleration service application can help increase the transmission speed by 1.5 to 4 times.

E-schoolbag scenario optimization

The transmission speed of multicast packets is increased, improving the effects of the E-schoolbag scenario in an all-round way.

Intelligent broadcast acceleration

The transmission speed of broadcast packets is automatically increased based on the actual environment, thereby improving the transmission efficiency of broadcast packets.

Terminal dragging prevention

This function aims to prevent the decrease of the entire network speed caused by low-speed terminals based on the time fairness algorithm.

Terminal viscosity prevention

This function involves detecting STAs connected to APs and intelligently guiding the STAs to the optimal AP.

Prohibited access of low-speed terminals

The speed of access terminals is limited. Weak-signal terminals with a speed lower than the specified value are prohibited from accessing the network. This improves the entire network speed.

High-density access scenario optimization

The response to broadcast probe requests is controlled for the purpose of optimizing high-density access scenarios.

ARP-unicast conversion

ARP broadcast packets are converted into unicast packets. This reduces the number of broadcast packets, thereby improving the transmission speed.

Prohibit DHCP requests destined for wireless terminals

After this function is enabled, DHCP broadcast requests will be forwarded only to the wired network, instead of other wireless network. This improves the network throughput and performance of the wireless network.

Hotspot analysis

AP-based access user quantity statistics

The number of connected users and change trends of each AP in the recent one day, one week, and one month can be measured.

AP-based network access traffic statistics

The network access traffic and change trends of each AP in the recent one day, one week, and one month can be measured.

AP-based signal quality analysis

Statistic analysis for the signal usage, noise, retransmit rate, BER, and BER change trends of each AP is supported.

AP access mode

AC discovery mechanism

L2 broadcast automatic discovery

L3 discovery based on configured static IP addresses

DHCP Option43 discovery

DNS domain name discovery

Cross-WAN and cross-NAT remote AP deployment

Supported

webAgent

Controller IP addresses can be dynamically discovered by using the webAgent technology. This avoids AP disconnection caused by unfixed controller IP addresses.

Tunnel encryption

Supported

Wireless relay/bridge

Relay mode

Point-to-point and point-to-multipoint supported

Relay frequency band

2.4/5.8 GHz

Disable wireless network on relay frequency band

Supported

Wireless backhaul service

Supported

 

Bu ürüne ait özellikler veritabanımızda bulunmamamktadır.

Bu ürüne alternatif bir ürün bulunmamaktadır.

Bu ürünle ilişkili bir ürün bulunmamaktadır.