" network expert "
Teltonika TSW114 5Port (1000Mbps) DIN Rail Industrial Switch
TSW114 is an affordable way to simplify your connectivity with its plug and play nature and 5 x Gigabit Ethernet ports that provide stable and reliable connectivity for high-bandwidth solutions. The Ethernet switch has front-facing ports and an integrated DIN rail bracket to enable easy installation across many industrial environments - especially control cabinets.
TSW114 is an affordable way to simplify your connectivity with its plug and play nature and 5 x Gigabit Ethernet ports that provide stable and reliable connectivity for high-bandwidth solutions. The Ethernet switch has front-facing ports and an integrated DIN rail bracket to enable easy installation across many industrial environments - especially control cabinets.
TSW114 is an affordable way to simplify your connectivity with its plug and play nature and 5 x Gigabit Ethernet ports that provide stable and reliable connectivity for high-bandwidth solutions. The Ethernet switch has front-facing ports and an integrated DIN rail bracket to enable easy installation across many industrial environments - especially control cabinets.
-
ETH
5 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
-
IEEE 802.3 series standards
802.3i, 802.3u, 802.3ab, 802.3x, 802.3az
-
Bandwidth (Non-blocking)
10 Gbps
-
Packer buffer
128 KB
-
MAC address table size
2K entries
-
Jumbo frame support
9216 bytes
-
Connector
2-pin industrial DC power socket
-
Input voltage range
9 – 30 VDC
-
PoE (passive)
Possibility to power up through ETH1 ports, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
-
Power consumption
Idle: 0.3 W / Max: 2.3 W
-
Ethernet
5 x RJ45 ports, 10/100/1000 Mbps
-
Status LEDs
1 x Power LED, 10 x ETH status LEDs
-
Power
1 x 2-pin industrial DC power socket
-
Other
1 x Grounding screw
-
Casing material
Anodized aluminum housing and panels
-
Dimensions (W x H x D)
113.1 x 27.4 x 80.5 mm
-
Weight
174 g
-
Mounting options
Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
-
Regulatory
CE, REACH, RoHS, WEEE, UKCA, FCC, IC, CB, RCM
-
Standards
EN IEC 62368-1:2020+A11:2020
Bu ürüne ait özellikler veritabanımızda bulunmamamktadır.
Bu ürüne alternatif bir ürün bulunmamaktadır.
Bu ürünle ilişkili bir ürün bulunmamaktadır.
