Prodoct Informations

XENTINO VX200IDC is an Ultra-Speed Gigabit Ethernet Copper Extender that supports a remarkable aggregated bandwidth up to 300Mbps. Downstream: 150Mbps / Upstream: 150Mbps) It delivers fiber-optic like speeds on existing copper nfrastructure, enabling a good lternative in place where fiber is not economical to deploy.

KEY FEATURES

• High speed Ethernet extension over UTP, CAT 5e/6/7 or Coaxial cables
• Support ITU-T G.993.5 G.Vectoring and G.INP
• Selectable 8 different profile settings via Dip Switch (G.INP/Interleaved, Target SNR 6/8/12/24 dB, Symmetric/Asymmetric Modes)
• Compatible with Xentino and third-party VDSL2 IP DSLAM when operates in CPE(RT) mode
• Configurable SNR profile for noisy environment
• Cost effective bridge function to connect two Ethernet LAN
• IEEE 802.1Q VLAN tag transparent
• Easy installation via simple plug-and-play
• Accompanied by Windows-based “DSLmonitor” tool for easy management

PRODUCT OVERVIEW

XENTINO VX200 is an Ultra-Speed Gigabit Ethernet Copper Extender that supports a remarkable aggregated bandwidth up to 300Mbps. (Downstream: 150Mbps / Upstream: 150Mbps)  It delivers fiber-optic like speeds on existing copper infrastructure, enabling a good alternative in place where fiber is not economical to deploy. The VX200 is equipped with a Gigabit Ethernet Port (RJ-45 connector) and one VDSL2 port (RJ-45 connector). 8 different profile settings can be flexibly selected via dip switches to suit various applications and environments. Symmetric profile can be applied as a standard Ethernet connection while Asymmetric profile can be used for other services like Video streaming or IP surveillance services which require high traffic flow in an uni-direction configuration. The VX200 supports transparent LAN bridging to extend Ethernet service over UTP, Cat 5+ or Coaxial cables. It is accompanied by a Windows-based software tool DSLmonitor that allows easy access for users to read and monitor the VX200 through its Ethernet port. With XENTINO VX200 superior performance in its category, it is the best high throughput Long Reach Ethernet Extenders for service providers to deploy their IP-based networking services to meet various application scenarios.

SPECIFICATIONS

• VDSL Interface:
  • RJ-45 connector
  • DMT Encoding
  • Complying with G993.1/G993.2/G993.5/G.997.1/G.998/G.INP
  • On-board surge protection
• LAN Interface:
  • 1xRJ-45 connector
  • Complying with IEEE 802.3/802.3u/802.3z
  • 10/100/1000 Base-T; Auto-Negotiation, Auto-MDI/MDI-X.
• 4-position DIP Switch
  • Selectable Master(OT) or Remote(RT) mode
  • Selectable 8 different profile settings via Dip Switch (G.INP/Interleaved, Target SNR 6/8/12/24 dB, Symmetric/Asymmetric Modes)

• LED:
  • Power : On/Off
  • LAN: Fast Ethernet /Gigabit Ethernet
  • VDSL2: Mode – CO(OT)/CPE(RT)

           Sync – Idle/Trained/Link

• Power supply:
  • 12VDC over 2.1mm DC Jack (External Power Adaptor  included)
  • Power Consumption: 4.5 Watts maximum
• Dimension(WxHxD): 73.4mm x 22.8mm x 96.2mm
• Operating Temperature: 0°C ~45°C
• Humidity: 0%~95%RH (non-condensing)
• Installation(Optional): Wall Mounting/Media Converter Chassis
• Regulatory Compliance
  • CE Class A
  • FCC Part 15B Class A
  • EN60950

PERFORMANCE (DOWNSTREAM/UPSTREAM)

* The above performance data is for reference only, the actual line rate may vary depending on the quality of the copper wire and environmental conditions.

Ordering Info