Xentino DC70E 11n 300Mbps 2.4G Outdoor CPE.. | Simet Bilişim Teknolojileri A.Ş.

Xentino DC70E 11n 300Mbps 2.4G Outdoor CPE..

Xentino

Xentino DC70E is an 11n 2.4G 300Mbps Outdoor CPE. It can supply the stable Wi-Fi signal for 10PCS IP Cameras in 500 meters.

Xentino DC70E is an 11n 2.4G 300Mbps Outdoor CPE. It can supply the stable Wi-Fi signal for 10PCS IP Cameras in 500 meters.

Product Overview

Xentino DC70E is an 11n 2.4G outdoor CPE with LED display. It comply with 802.11n Wi-Fi standard, data rate up to 300Mbps, Build in 11dBi panel antenna, the Wi-Fi range to up to 1000 meters. With LED display, wireless AP, Wi-Fi repeater, WDS operation mode, it work in pairs for point to point connection, make more than 10pcs IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.

Main Features

  • Comply with IEEE 802.11n standard, 2.4G, 300Mbps Data Rate
  • 1*10/100Mbps WAN Port,1*10/100Mbps LAN Port
  • Build in 11dBi MIMO panel antenna, stronger signal strength, more wireless coverage
  • WAN Port support passive PoE
  • Support SSID broadcasting, Multi SSID up to 4
  • Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WDS operation mode
  • With function of build in firewall, IP filter, URL filter and MAC filter  
  • Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security

300Mbps Data Rate

DC70E  features 802.11n Wi-Fi and MIMO technology, 300Mbps wireless speed ensures high speed internet access and more end users access.

 

High Gain Antenna for more range

With 11dBi MIMO high gain antenna, the point to point Wi-Fi range up to 1KM distance. What’s more, it can supply the stable Wi-Fi signal for 10pcs IP Cameras in 500 meters.

 

Power over Ethernet

DC70E  has integrated passive Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

 

Multiple Operation and LED Display

DC70E  support gateway, wireless AP, Wi-Fi repeater, WDS operation mode, it can apply to almost wireless application scene; Then it with LED display to show AP/Client operation mode, Channels, IP address and Signal Strength; What’s more, it is easy to setup DC70E ’s IP address, RF Power, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.

 

Access Controller System & Cloud Management System

With Access Control System under AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....

 

Then work with Cloud Management System, easy to do central and remote management, advertisement and multiple authentication make this AP more professional in Wi-Fi Projects.

 

Hardware:

Chipset

Realtek RTL8197FNT

Standard

802.11b/g/n

Memory

64MB RAM

Flash

8MB

Interface

1 * 10/100Mbps RJ45 WAN Port

1 * 10/100Mbps RJ45 LAN Port

1 * LED display, show operation mode, channel, signal strength

1 * F(Function) switch button for LED display

1 * S(Select) button for LED display

1 * DC Injector

1 * Reset button, press 15 seconds to revert to default setting, press 1 second to finish LED display configuration

LED Indicator

PWR(Power), WAN, LAN, Wi-Fi

Antenna

Build in 11dBi MIMO Panel Antenna, 2.4GHz

Water-Proof Level

IP65

Power Consumption

24V PoE<5W

Size

168mm*88mm*57.6mm

Weight

234.5g

RF Data

Frequency

802.11b/g/n (2.4GHz)

Country code

FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM

DSSS = DBPSK, DQPSK, CCK

Throughput

300Mbps

RF Power

11n: @MCS7:15±2DB,    @MCS0:18±2DB.

11g: @54M:15±2DB,     @6M:18±2DB.

11b: @11M:19±2DB,     @1M:19±2DB.

Receive Sensitivity

11n: -69dbm@MCS7,    -84dbm@MCS0.   

11g: -72dbm@54Mbps,  -82dbm@6Mbps.  

11b: -80dbm@11Mbps,  -94dbm@1Mbps,

EVM

11n: ≤-28 DB

11g: ≤-25 DB

11b: ≤-10 DB

PPM

±20ppm

 

 

Firmware Features

Operation mode

Wireless AP, Gateway, Wi-Fi Repeater, WDS

WAN Type

Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)

Wireless Security

64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption

SSID

Multiple SSID up to 4

Firewall

DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

Protocols

IPv4

Others

Package Contents

300Mbps Outdoor CPE

Ethernet Cable                                             

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

Operating Temperature: -30~55 ℃

Max Operating Temperature: -40~70 ℃ (Throughput lower)

Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing

Management

Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System

 

 

Bu ürüne ait özellikler veritabanımızda bulunmamamktadır.

Xentino DA1200 11ac 1200Mbps High Power Outdoor Wireless AP..

DA1200 is the 1200Mbps high power industrial use Outdoor wireless access point with the next generation 802.11ac Wi-Fi standard, support 2x2 MU-MIMO technology, it is dual band, 2.4GHz (300Mbps) and ...

Xentino DC3200 11ac High Power Outdoor CPE (10Km)

DC3200 is an Atheros Solution high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), equiped G ...

Bu ürünle ilişkili bir ürün bulunmamaktadır.