Xentino DC2200 11ac Wave2 High Power Outdoor WiFi Bridge (3Km) | Simet Bilişim Teknolojileri A.Ş.

Xentino DC2200 11ac Wave2 High Power Outdoor WiFi Bridge (3Km)

Xentino

DC2200 is a high power outdoor WiFi bridge supports WAVE 2, comply with the next generation 802.11ac Wi-Fi standard, 2x2 MIMO technology, 2.4GHz and 5GHz dual band, having 1200Mbps data rate, Gigabit WAN/LAN port. With water-proof case, high gain 14dBi WiFi antenna and PoE (Power over Ethernet), it is installed in outdoor environment to reach 3KM PTP/PTMP WiFi range, very good choice in long range data transmission or Wireless security.

DC2200 is a high power outdoor WiFi bridge supports WAVE 2, comply with the next generation 802.11ac Wi-Fi standard, 2x2 MIMO technology, 2.4GHz and 5GHz dual band, having 1200Mbps data rate, Gigabit WAN/LAN port. With water-proof case, high gain 14dBi WiFi antenna and PoE (Power over Ethernet), it is installed in outdoor environment to reach 3KM PTP/PTMP WiFi range, very good choice in long range data transmission or Wireless security.

ABS weather-proof case

DC2200 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, rainy weather. Meantime, it adaptive to various environment, the working temperature can be at -40℃ to 55℃. Suit for any country.

High Power, High Gain Antenna, more WiFi Range

Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, build in dual band panel WiFi antenna, the PTP/PTMP WiFi range more than 3KM.

Power over Ethernet

DC2200 has integrated active Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.

Multiple Operation Mode

DC2200 support wireless AP, Gateway, WISP, WiFi Repeater operation mode, max to meet with different operation request.

 

Main Features

  • Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
  • 1*10/100/1000Mbps WAN Port,1*10/100/1000Mbps LAN Port
  • 500mW high power, Qualcomm Chipset, 16M Flash, 128M DDR2 RAM, more user, more stable
  • Support 48V active PoE, work with IEEE 802.3at standard PoE switch or 48V PoE adapter.
  • Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz), support tag
  • VLAN based on SSID to protect the whole data safety.
  • Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode
  • With function of firewall, IP filter, URL filter and MAC filter
  • Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security

Specifications

Hardware

Chipset

Qualcomm QCA9563 + QCA9886 +QCA8334

Standard

802.11ac/b/g/n, MIMO technology

Memory

128MB DDR2 RAM

Flash

16MB

Interface

1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at standard PoE

1 * 10/100/1000Mbps RJ45 LAN Port

1 * Reset button, press 15 seconds to revert to default setting

Antenna

Build in Panel antenna, 12dBi in 2.4GHz, 14dBi in 5.8GHz

Power consumption

48V PoE<30W

Size

315mm * 145 mm * 80 mm

RF Data

Frequency

2.4G: 802.11b/g/n;   5GHz: 802.11a/n/ac

2.4GHz: 2.312GHz to 2.4835GHz

5GHz: 5.020 - 6.1000 GHz

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM

DSSS = DBPSK, DQPSK, CCK

Data Rate

1200Mbps (2.4G 300Mbps, 5.8G 900Mbps)

 

Receive Sensitivity & RF Power

RF Power

2.4G:  11n @MCS7:23±2DB,   @MCS0:25±2DB.

       11g @54M:24±2DB,     @6M:26±2DB.

       11b @11M:26±2DB,     @1M:28±2DB.

5.8G:  11a @54M:24±2DB,     @6M:26±2DB.

       11n @MCS7:22±2DB,    @MCS0:24±2DB.

       11ac @MCS9:21±2DB,   @MCS0:23±2DB.

Receive Sensitivity

2.4G:  11n: -70dbm@MCS7,    -88dbm@MCS0.

       11g: -72dbm@54Mbps,   -88dbm@6Mbps.

       11b: -85dbm@11Mbps,   -94dbm@1Mbps.

5.8G:  11a: -72dbm@54Mbps,   -90dbm@6Mbps.

       11n: -70dbm@MCS7,    -90dbm@MCS0.

       11ac:-60dbm@MCS9,   -86dbm@MCS0.

EVM

 11n: ≤-28 DB

 11g: ≤-25 DB

 11b: ≤-10 DB

 11a: ≤-25 DB

PPM

±20ppm

Max Users

128

Firmware Features

Operation mode

Wireless AP, WiFi Repeater

WAN Type

Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)

Wireless Security

64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK, 802.1x encryption

SSID

Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)

Firewall

DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding

Protocols

IPv4

Others

Package Contents

  • 1200Mbps Dual Band wireless access point
  • Ethernet Cable                                            
  • Quick Installation Guide
  • Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

  • Operating Temperature: -40~55 ℃,  
  • Storage Temperature: -40~70 ℃
  • Operating Humidity: 10%~90% non-condensing;
  • Storage Humidity: 5%~90% non-condensing

Management

Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

 

 

 

 

Bu ürüne ait özellikler veritabanımızda bulunmamamktadır.

Xentino DC3200 11ac High Power Outdoor CPE (10Km)

DC3200 is an Atheros Solution high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), equiped G ...

Bu ürünle ilişkili bir ürün bulunmamaktadır.