Keyword(s) You Have Searched For : "POE" There are Products item(s) found .
AirLive POE-48TUv2 802.3af PoE Splitter with Switchable Output
The AirLive POE-48TUv2 is an 802.3af PoE Splitter with switchable output which splits a networked PoE signal into separated power and Ethernet data sources. It provides 3-segment voltage selection and you can dip to required voltage according to your network device’s power input and compatible with IEEE 802.3af standard.
Xentino MHX1000RJ45-1 1000Mbps Ethernet Port Lightning Arrester (Surge Protector)
It is a lightning protection device developed for Xentino MHX1000RJ45-1 Outdoor Access Points. This device is installed between the AP and the Switch. It should be installed in a closed area and close to the switch. Considering the PoE adapter, the installation order should be: Switch (Indoor) - PoE Injector (Indoor) - Lightning protection (Indoor) - AP (Outdoor)
Sundray GO545-PSE1000 (30W) 802.3at gigabit PoE injector
Input：AC110~240V 50/60 HZ Protocol：802.3at，30w Rate：10/100/1000M self-adaption Notes：suitable for all series indoor AP and Outdoor A
WisNetworks WIS-POE24G 10/100/1000 24VDC Power over Ethernet Adapter (injector)
WIS-POE24 is used for powering up all Wisnetworks radio. It is compact with no cord design and compatible with all 24VDC Passive PoE device such as IP camera, wireless access point. We can provide all plug standard for different regions like EU/US/EN/AU plug pin.
Xentino RP024W01 802.3at Gigabit PoE injector (24W)..
Xentino RP024W01 802.3at Gigabit PoE Injector. (24W) Input AC100 ~ 240V 50/60 HZ 0,6A Max Output DC 48V 0,5A 24W. Supports IEEE 802.3at Ethernet Port Rate?10/100/1000Mbps
Xentino PS2G35W 802.3at Gigabit PoE Injector (35W)..
Xentino PS2G35W 802.3at Gigabit PoE Injector (35W) Input AC110 ~ 240V 50/60 HZ, Output DC 52V, 35W. Supports IEEE 802.3at/af Rate：10/100/1000Mbps
WisNetworks WIS-SG900P 10-Port 48 | 24 | 12VDC Adjustable Smart PoE Unmanaged Switch
The WIS-SG900P is the world first voltage-adjustable PoE switch,compatible with IEEE 802.3at. You can easily adjust the PoE output with 12/24/48VDC by sliding the small switch on the front panel, thus making it easy to power up different type PoE access point. One power over Ethernet Switch for 12/24/48VDC is absolutely a big help for you to configure and manage your complex equipments both indoor and outdoor situation.
Draytek VigorSwitch P1092 8Port Smart Lite PoE Switch
The VigorSwitch P1092 is ideal for SOHO and small business with the high-performance capability. To cater for high bandwidth traffic, it is equipped with 8 Gigabit Ethernet ports for the LAN side, and 2 SFP ports for the backbone side. VigorSwitch P1092 is equipped with extensive facilities for maximizing your LAN performance, VLAN capability to allow flexible network design, and QoS capability for flexible bandwidth control.