Prodoct Informations

Industrial Sunyoun 4,2Amp Adapter 200W 48Volt. Input: 200-240VAC 50 / 60Hz, Output: 48VDC, 4.2A, short circuit protection, power supply maximum efficiency rate of 80%.

These products are used to keep the voltage constant by filtering the changes occuring in the AC supply.
Are used in the various panels and automation applications endstr.

200V AC input voltage of all products stop. Voltas output varies depending on the device you use.
Power kaynağımn connections due as shown on the device before without "+" and "-" polarity, and check the AC 220V mains input locations. Make connections according to these terminals. If you doubt the connection settings you can receive technical support from the company purchased.

Always more than one power supply for high power "+" and "-" polarity bulunmaktat.

Switched-mode power supply (Switching power supply) is usually working with efficiency of 80%. Capacity over the life of the device in use will be reduced.

WARNINGS
1. Fasten the screws on the media you will use the power supply.
2. Output Links definite must when output connections.
3. Do not touch the power supply Electrical connection is made after
4. Power supply should be used in the transmitted values, you must use the capacity.
5. diameter or possible damage to the electrical power supply if the wrong link.