Prodoct Informations

The WAE-140PAV2 is a 14dBi wireless antenna constructed of weather resistant material. The directional (horizontal 30 degree, vertical 30 degree) characteristic allow the antenna to focus its signal for longer distance. It is very suitable for outdoor point-to-point bridge use. The new color and texture blends your antenna into your building outer wall.

Wireless signal loses a majority of its strength when penetrating a concrete wall. Therefore, indoor AP has difficulty to makes its signal available outside of the building. The WAE-140PAV2 allows your AP's antenna to extend outside, mounting on a rooftop or outside wall. Furthermore, patch antenna focus the antenna signal in a particular direction to allow secure signal transmission over longer distance. This is essential for outdoor point-to-pint bridge use. The antenna comes with 20cm pigtail cable with female N-Type connector to connect with outdoor AP. To connect with indoor AP's reversed-SMA connector, a RG316-SNF adapter cable and RG213-SNN cable is required.

Connector type	Female N-Type
Recommended adapter and cable	RG-213-SNN cable required for connection with outdoor AP RG316-SNM cable required for short connection(30cm) with indoor AP RG316-SNF and SG213-SNN required for longer distance(>30cm) with indoor AP
Frequency range	2.4~2.5GHz
Impedance	50 Ohms nominal
VSWR	1.5 or smaller
Gain	14dBi
Radiation	directional 30 degree horizontal, 30 degree vertical
Polarization	Vertical
Material	Element: Aluminum and Brass Radome: ABS
Temperature	Operating: -20 to +70 degree C Storage: -30 to +80 degree C
Product Weight (g)	800g
Product Size ( L x W x H (mm) )	210 x 210 x 23 mm